Canon iR6570 Series Portable Manual page 206

Sub-item Description
CNT-MCON Use it to reset the service counter whose reading is kept by the main
controller PCB.
The counter reading is reset when the OK key is pressed.
Procedure
1) Select the item, and press the OK key.
CNT-DCON Use it to reset the service counter whose reading is kept by the DC
controller PCB.
The counter reading will be reset when the OK key is pressed.
Procedure
1) Select the item, and press the OK key.
OPTION Use it to reset the service mode setting OPTION to its default
setting (as upon RAM initialization).
The setting will be initialized when the OK key is pressed.
The execution of this item will reset the data kept by the main
controller, DC controller, and reader controller.
Procedure
1) Print out the service mode particulars using the following:
COPIER>FUTON>MISC-P>P-PRINT.
2) Select the item, and press the OK key.
MMI Use it to reset the following settings of user mode:
- backup user data for copier control panel (user settings)
- common settings backup data (user settings)
- various backup data except FAX data (sure settings)
The settings will be initialized when the main power switch is
turned off and then back on.
Procedure
1) Select the item, and press the OK key.
2) Turn off and then back on the main power.
MN-CON Use it reset the RAM on the main controller PCB.
The RAM will be reset when the main power switch is turned off
and then back on.
Procedure
1) Print out the service mode particulars using the following:
COPIER>FUNCTION>MISC-P>P-PRINT.
2) Select the item, and press the OK key.
3) Turn off and then back on the main power.
4) As necessary, enter the data you have printed out using P-
PRINT.
COPIER > FUNCTION > CLEAR
Level
1
1
1
1
1