Feeder; Feeder List - Canon iR6570 Series Portable Manual

Chapter 5
Sub-item
HD-CLEAR

5.4.2 FEEDER

5.4.2.1 FEEDER List

iR5570 / iR6570
Sub-item
SENS-INT
MTR-CHK
TRY-A4
TRY-A5R
TRY-LTR
TRY-LTRR
5-60
COPIER > FUNCTION > SYSTEM
Description
Use it to initialize the partition you have selected using CHK-
TYPE.
Procedure
1) Select the item.
2) Press the OK key.
T-5-50
COPIER > FEEDER > FUNCTION
Description
Use it to adjust the sensitivity of individual sensors of the ADF.
Be sure to clean the sensor area before executing the item.
Procedure
1) Select the item, and press the OK key.
2) See that the execution ends automatically.
Use it to check the ADF motor on its own.
Procedure
1) Press MTR-CHK to highlight.
2) Type in the appropriate motor number using the keypad.
3) Press the OK key.
4) Press MTR-on to start the check.
Motor Number
0: pickup motor
1: feed motor
Use it to execute automatic adjustment of paper width detection
reference point 1 of the ADF original pickup tray. (A4)
Use it to execute automatic adjustment of paper width detection
reference print 2 of the ADF original pickup tray. (A5R)
Use it to execute automatic adjustment of paper width detection
reference point 1 of the ADF original pickup tray. (LTR)
Use it to execute automatic adjustment of paper width detection
reference point 2 of the ADF original pickup tray. (LTRR)
Level
1
0009-6356
Level
1
1
1
1
1
1