Chapter 5
Sub-item
SIZE-SW
LS-DBL
STAMP-SW
5.5.3 SORTER
5.5.3.1 SORTER List
iR5570 / iR6570
Sub-item
BLNK-SW
MD-SPRTN
5-98
T-5-59
COPIER > FEEDER > OPTION
Description
Use it to enable detection of a mix of AB and inch originals.
setting
0: ON (do not detect; default); 1: OFF (detect)
Use it to enable/disable ADF high-speed duplex mode.
setting
0: enable (execute high-speed duplex mode; normal mode;
default)
1: disable (do not execute high-speed duplex mode; low-speed
duplex mode)
Use it to indicate the presence/absence of a stamp. (If fitted, set
'1' for STAMP-SW).
setting
0: stamp absent
1: stamp present (default)
T-5-60
COPIER > SORTER > OPTION
Description
Use it to set the margin width on both sides of a crease when the
saddle stitcher is in use.
setting
0: normal width (5 mm)
1: extra width (10 mm; default)
Use it to enable/disable accessory-independent mode in the
event of a finisher error.
setting
0: normal (disable accessory-independent mode; default)
1: enable (do not staple or align)
Level
1
1
1
0009-6361
Level
1
1