Canon iR6570 Series Portable Manual page 96

Code Description
0001 The paper positioning plate home position
sensor does not go on even when the paper
positioning plate motor has been driven for
1.33 sec.
paper positioning plate motor (M4S),
paper positioning plate home position
sensor (PI7S)
0002 The paper positioning plate home position
sensor does not go off even when the paper
positioning plate motor has been driven for
1 sec.
paper positioning plate motor (M4S),
paper positioning plate home position
sensor (PI7S)
E5F1 There is a saddle paper folding error.
0001 The number of detection pulses of the
paper folding motor clock sensor is lower
than a specific value.
paper folding motor (M2S), paper folding
motor clock sensor (PI4S)
0002 The start of the paper folding home
position sensor does not change even when
the paper folding motor has been driven
for 3 sec.
paper folding motor (M2S), paper folding
motor clock sensor (PI4S)
E5F2 There is a saddle guide error.
0001 The guide home position sensor does not
go on even when the guide motor has been
driven for 0.455 sec.
guide motor (M3S), guide home position
sensor (PI13S)
0002 The guide home position sensor does not
go off even when the guide motor has been
driven for 1 sec.
guide motor (M3S), guide home position
sensor (PI13S)
E5F3 There is a saddle alignment error.
Remedy
- Check the paper positioning plate motor
(M4S) and the paper positioning plate
home position sensor (PI7S).
- Check the paper folding motor (M2S)
and the paper folding motor clock sensor
(PI4S).
- Check the guide motor (M3S) and the
guide home position sensor (PI13S).