Canon iR6570 Series Portable Manual page 227

Sub-item Description
OP-SZ-DT Use it to enable/disable original size detection for book mode.
setting
0: off (require input of size on control panel; default)
1: on (use auto original size detection)
NW-SCAN Use it to permit/not permit the network scan function.
setting
0: do to permit network scan function (default)
1: permit network scan function
Caution:
For the Japanese model, the value cannot be changed.
For a non-Japanese model, PSPCL is fixed to '1'; the value may
be changed on other models.
HDCR-DSP Use it to set how HDD full deletion mode may operate.
1: using 0s, delete once (default)
2: using random data, delete once
3: using random data, delete 3 times
JOB-INVL Use it to set the interval of jobs for an interrupt.
setting
0: standard (at time of interrupt copy, continuously output next
jobs; default)
1: output next job only after delivering last sheet of interrupt
copy
2: output next job only after delivering last sheet of all jobs
LGSW-DSP Use it to enable/disable display of 'enable/disable log indication'
on the user mode screen.
setting
0: do not display (default)
1: display
PCL-COPY Use it to set PCL command COPIES Meru/Pintubo/Hood
compatibility.
0: use page-based control according to COPIES command value
specified for each page (default)
1: Meru/Pinatubo/Hood compatibility mode
2 to 6535: reserved
PRJOB-CP Use it to set the CCV count pulse generation for reception and
report output.
setting
0: do not generate count pulse (default)
1: generate count pulse
COPIER > OPTION >USER
Level
2
2
2
2
2
2
2