Voltech AT5600 User Manual page 431

C H A P T E R 1 6 - C H A N G E L O G
V 1.001.000 - 16 AUG 2018
FUNCTIONALITY
CUSTOM TEXT - Added custom text to the execution screen on first run – As with
AT36, this is programmed via AT Editor program options
PRINTING - Results printouts when the mode is set to "Failures Only" only print
failing tests, not the entire program when any single test fails. This change has no
effect on the print button in the results screen.
GUI - "Running", "Learning" and "Compensating" text on the execution screens to be
orange instead of black
GUI - Changed the word "Running" to "Compensating" on the short, open and load
compensation screens to make clearer for user.
GUI – Fixed interface bug on STOP ON FAIL and interlock triggers on results
screen.
GUI – Fixed initial false STOP ON FAIL on first run after power up.
TESTS
OUT - OUT tests now have a "break before make" for their pattern and give a
minimum of 20 ms per transition.
On each test relays are opened, 20 ms wait, relays are closed, 20 ms wait.
Previously this was 5 ms for all.
This makes functionality the same as AT3600 and provides some overhead for
slower or intermittently bouncy external relays controlled using OUT.
ANGL - Results return for negative values no longer have an absolute value applied.
This did not affect PASS/FAIL judgement, but was misleading, as AT results screen
was correct, but Editor Server did not show -Ve.
R CTY - Resolved a ranging issue that caused resistance and continuity tests to fail
on later tests, after they were run open circuit.
R CTY - Removed periodic offsets, that was skewing the effects of compensation
and causing periods of error before next offset check. DCR tests are now offset
compensated silently on every run to account for thermal drift of unit
.
AT5600 User Manual 98-119 issue 14 Page 431