Storing Test Programs - Voltech AT5600 User Manual

C H A P T E R 1 6 - C H A N G E
15.4.7.
After a test program has been created using the Editor application it will be ready
for use with your AT series tester. The diagram below shows a potential
connection scheme for use with a single tester and two PCs.
You may copy program files directly into the program directory used by the server
application.
IMPORTANT: When a program file is copied to the server and a file with the
same name is already resident within the server, the incoming file will replace the
previous file.
AT5600 User Manual 98-119 issue 14
L O G

Storing Test Programs

Page 389