Installing The Server Software; Computer Requirements; Installation Instructions - Voltech AT5600 User Manual

C H A P T E R 1 6 - C H A N G E
15.2.

Installing the Server Software

All software is available from the Voltech website www.voltech.com.
15.2.1.
Before attempting to install any Windows software, check that the PC satisfies the
following hardware requirements:
PC Processor:
Memory:
Hard Disk Space:
(Note: 3MB does not include disk space required for storing programs or test
results)
Operating system:
Supported screen resolutions:
1024
15.2.2.
Download and follow the instructions to install the AT Server software. The
installation program will suggest a folder in which to place the installation files:
c:\Program Files\Voltech Instruments\Voltech AT Server
This directory will be created if it does not already exist. If you want to place the
files elsewhere, browse to another directory.
If you have a previous version of the Server software already installed on your
PC, the procedure outlined above may also be used to install a new version.
None of your program files will be lost. The same Server program is used for all
AT Series testers (excluding the discontinued AT3500 and AT1000).
AT5600 User Manual 98-119 issue 14
L O G

Computer Requirements

Installation Instructions

486 or better
4MB minimum
5MB minimum
Windows 7, 8 and 10. 32 or 64 Bit
640 x 480, 800 x 600, 1024 x 768, 1280 x
Page 380