Select:) Save/Load Menu Branch; Save/Load Configuration:) Save - Comtech EF Data CDM-710 Installation And Operation Manual

CDM-710/L Broadcast Satellite Modem
Front Panel Operation
7.2.5

(SELECT:) Save/Load Menu Branch

You may use this menu only when the unit is in "Local" mode. If you
attempt to use this menu while the unit is in "Remote" mode, the
following messages display:
Follow the prompts. Press ENTER to change to "Local" mode. Press CLEAR to
remain in "Remote" mode. You may proceed once you are operating in "Local"
mode.
The Save and Load submenus permit you to store or load up to 10 different
modem configurations in the non-volatile memory of the modem.
Use the arrow keys to select Save or Load. Press ENTER.
 

7.2.5.1 (Save/Load Configuration:) Save

Using Loc #9 as the example, if you select Save and no configuration exists in this
slot, the second line reads 'Empty' as shown here. However, if the selected Loc
#9 already contains data, what displays is similar to this next example:
THIS UNIT IS CURRENTLY
IN REMOTE MODE!!
DO YOU WANT LOCAL MODE?
ENT=Yes CLR=No
Save/Load Configuration:
Save Load
Save Config to Loc: 9
Empty
7–63
MN/CDM710.IOM
(E)
(E)
Revision 12