Chapter 8. Ethernet Interface Operation; Overview; Prerequisites - Comtech EF Data CDM-710 Installation And Operation Manual

Chapter 8. ETHERNET
INTERFACE OPERATION

8.1 Overview

Operation of the Ethernet Interface is available when you connect a user-
supplied, Windows-based PC to the CDM-710 or CDM710L Broadcast Satellite
Modem rear panel 'J4 | Ethernet' RJ-45 10/100 BaseT Ethernet port.
Three protocols are available to use for Ethernet remote M&C. Operate these
protocols separately.
• Simple Network Management Protocol (SNMP). This requires a user-
supplied Network Monitoring System (NMS) and a user-supplied
Management Information Base (MIB) File Browser.
CAUTION
Comtech EF Data recommends use of the Ethernet-based SNMP
interface for advanced users only. All other users are strongly
encouraged to use the HTTP (Web Server) Interface for remote
Monitor and Control (M&C) of the unit.
• Telnet Interface. You may use the serial remote control protocol via this
interface. This requires use of Windows Command-line, or a user-
supplied terminal emulation program such as HyperTerminal.
• HTTP Interface. This requires a compatible user-supplied web browser
such as Internet Explorer.

8.1.1 Prerequisites

Before you proceed with Ethernet remote product management, make sure the
following is true:
8–1