Comtech EF Data CDM-710 Installation And Operation Manual page 279

CDM-710/L Broadcast Satellite Modem
Serial Interface Operation
I – Indicates the active interface type for the interface block. '1' indicates CDI-40 ASI; '2' indicates CDI-70 Gigabit
Ethernet Interface (GBEI); '3' indicates CDI-60 HSSI.
MGC CDI-40 ASI Example:
<0000/MGC=TRU111250.0000101.0000001070-10.0101000000001xxxxxxxxxx1250.0000101.00
0000107010101000000002.01xxxxxxxxxx00000xxxxxxxxxxxxxxx0100xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxx
MGC CDI-60 HSSI Example:
<0000/MGC=TRU111250.0000101.0000001070-10.0101000000001xxxxxxxxxx1250.0000101.00
0000107010101000000002.01xxxxxxxxxx00000xxxxxxxxxxxxxxx0000321.1xxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxx
[Tx Block] consists of 50 bytes for Transmit configuration, in the form
aaaa.aaaabcc.ccccccdefghhh.hijklmmmmmmnoxxxxxxxxxx where:
aaaa.aaaa=Tx Frequency (in MHz)
b=Tx Mode
cc.cccccc=Tx Symbol Rate
d=Tx FEC Type
e=Tx Modulation type
f=Tx FEC Rate
g=Tx Spectrum Inversion
hhh.h=Tx Power Level
i=Tx Carrier State
j=Tx Alpha Roll-off
same as TFQ
same as TMM
same as TSR
same as TFT (read-only)
same as TMD
same as TCR
same as TSI
same as TPL
same as TXO
same as TAR
9–71
MN/CDM710.IOM
Revision 12