Save/Load Configuration:) Load - Comtech EF Data CDM-710 Installation And Operation Manual

CDM-710/L Broadcast Satellite Modem
Front Panel Operation
You will see the time and date stamp of the stored configuration, for
identification purposes.
Use the arrow keys to select the location to where the current configuration

is to be stored. Press ENTER. There are 10 available locations, numbered 0
through 9.
If you select Save and this location does not contain a previously stored
configuration, a screen similar to this example will display:
If, however, you select Save and this location does contain a previously stored
configuration, a screen similar to this examples will display:
Use the arrow keys to select NO to cancel the action, or YES to overwrite the
 
existing configuration. Press ENTER.

7.2.5.2 (Save/Load Configuration:) Load

Use the arrow keys to select the location where the current configuration is

stored. Press ENTER. There are 10 available locations, numbered 0 through 9.
Using Loc #9 as the example, if you select Load and no configuration exists in this
slot, the second line reads 'Empty' as shown here. However, if the selected Loc
#9 contains data, what displays is similar to this next example:
Save Config to Loc: 9
01:02:43 05/08/05
New Config has been
Saved to Loc 9 (E)
Loc 9 Contains Data !
Overwrite? NO YES
Load Config from Loc: 9
Empty
7–64
MN/CDM710.IOM
(E)
(E)
(E)
Revision 12