Rear Side Radar Assist System - Geely GEOMETRY C 2023 Owner's Manual

Starting and driving
that the warning and braking will be delayed
or unachieved.
If a pedestrian is partially blocked, the
clothes worn are not easy to be judged as
body shape, and if the height is less than
0.8 m, or a large object is carried, he/she
can't be detected, which means that braking
cannot be achieved.
Cyclist*
The cyclist must be an adult, and the bicycle
must be designed for adults. Only when the
system detects the unmistakable outline
information of human body and bicycle, can
it achieve the best working effect. It means
that the system can clearly recognize
bicycle, head, arms, shoulders, thighs,
upper body, lower body, etc., in combination
with standard human movement.
Partial block, poor background contrast or
cyclists loaded with large goods cannot be
detected by the system, which means that
braking cannot be realized.
Shutdown and fault
When AEB is off, the AEB OFF indicator on
the instrument cluster will be on. When AEB
fails, the AEB fault warning lamp on the
instrument cluster will be on.

Rear side radar assist system*

The system detects the rear side of the
vehicle based on the rear medium-range
radar on both sides of rear bumper, to
realize lane change assist (LCA) (including
blind spot monitoring function), collision
mitigation support
opening warning (DOW) and rear cross
traffic alert (RCTA).
When the vehicle is powered on, the
rear side radar assist system will start
rear (CMSR), door
self-check, and the system function is not
available at this stage.
On the multimedia display screen, click Set
up → Assisted Driving →Rear side radar
sensor in turn, and select the opening or
closing of each function in this interface as
required. All function switches remain in the
last setting state.
The system will prompt the driver of driving
safety via the on/flashing of blind spot
monitoring indicator on the exterior rearview
mirror, instrument cluster prompt, sound
alarm, flashing of hazard warning lamp, etc.
The system works normally when the blind
spot monitoring status indicator on the
instrument cluster display turns green when
the vehicle starts. When the blind spot
monitoring status indicator is red, the
system fails.
Please keep the both sides of rear
•
bumper surface clean;
This system is only for driver assist, and
•
it cannot replace the driver's safe driving.
116