Installing The Microsoft Windows Me Operating System - Siemens SIMATIC Rack PC 840 Manual

7. Select the drive for data transfer. The selected drive is not the installation drive
for Windows. For the Windows setup, you need an available disk space of
approximately 300 MB on the installation drive for Windows.
Note
By default, drive C: is used for the data transfer (Recovery).
Ensure that there is an available disk space of approximately 300 MB left on drive
C: after the selected recovery data have been copied.
8. Confirm the end massage box.
9. Start the Windows setup program
LW:\I386\Winnt.exe /b
LW is the drive where the recovery data have been copied.
You can find the information on installation of Windows NT on the Recovery CD in
the folder SUPPORT\BOOKS\.
Note
If you want to become an expert user of Microsoft Windows NT Workstation, see
the "Windows NT Workstation Resource Kit" Version 4.0 (is not included in the
package). It contains specific information for administrators who are responsible
for installing, managing, and integrating Windows NT Workstation in a network or
multiuser environment.
9.2.2

Installing the Microsoft Windows Me Operating System

These steps should only be carried out when updating from Windows 2000 to
Windows Me or when reinstalling Windows Me.
With the help of the Recovery CD you can reinstall or restore the operating
system.
This CD contains encoded data which can only be transferred to a SIEMENS
SIMATIC PC.
Data transfer is carried out using the OEMSETUP.EXE program on the CD ROM
or using the recovery function after booting the CD ROM.
The operating system can be installed using the Windows Me setup program after
the necessary data has been transferred to the hard disk. To start the Windows Me
setup enter:
LW:\>WIN9x\SETUP.EXE
(LW: Drive to which the WIN9x folder has been transferred).
SIMATIC Rack PC 840 Manual
A5E00104826-03
Reinstallation of the Software
9-7