Installing Microsoft Windows Operating Systems - Siemens SIMATIC PC 847B Operating Instructions Manual

11.2.3.2

Installing Microsoft Windows operating systems

This CD contains encrypted data that can only be transferred to this system.
1. Boot from the Recovery CD and then follow the on-screen instructions until the Recovery
2. Select "Recovery Windows ..." in the "Siemens SIMATIC Recovery" window.
3. Follow the on-screen instructions.
4. Select "Start command prompt" in the Recovery functions window.
5. Enter the following commands in the command interface:
6. The preparation of the Windows installation is displayed.
7. When this operation completed, close the command prompt by entering the exit
8. Close the Siemens SIMATIC Recovery window by clicking the "Finish" button.
9. Setup automatically restarts the system and completes the installation of Windows.
10. Follow the on-screen instructions.
SIMATIC Rack PC 847B
Operating Instructions, 06/2008, A5E02203168-01
functions window is displayed.
Note
Make sure that sufficient free space is left on the drive after the transfer of selected
recovery data:
500 MB for Windows 2000
1500 MB for Windows XP
1500 MB for Windows Server 2003
DL:
cd \I386
Winnt32.bat
DL: Drive letter of the folder which contains the I386 directory.
command.
Note
References required by professional users of Microsoft Windows (not included in the
scope of delivery):
Microsoft Windows 2000 Professional Resource Kit (MSPress No 274) or
Microsoft Windows XP Professional, Technical Reference (MSPress No 934)
Microsoft Windows Server 2003, Planning Server Deployment for Windows Server 2003,
Technical Reference (MSPress No. 420)
These manuals contain specific information for administrators who install, manage and
integrate Windows in networks or multi-user environments.
Maintenance and service
11.2 Reinstalling the software
95