Removing And Installing The Hard Disk Drive From The Removable Drive Bay - Siemens SIMATIC IPC547E Operating Instructions Manual

7.4.1.2

Removing and installing the hard disk drive from the removable drive bay

Requirement
● The device is fully disconnected from the mains voltage, see section
● The front door is open, see section "Opening the front door (Page 53)".
● T10 screwdriver
Procedure
Removal
1. Slide the cover of the locking mechanism of the removable drive bay in the direction of
2. Use the appropriate key to unlock the tray on the removable drive bay.
3. Open the handle on the removable drive bay and open it at the highlighted spot in
SIMATIC IPC547E
Operating Instructions, 09/2013, A5E32317120-AA
"Switching off the device (Page 43)".
the arrow.
direction of the arrow until you feel a slight resistance.
Device maintenance and repair
7.4 Removing and installing hardware components
67