Removing And Installing A 3.5" Hard Disk - Siemens SIMATIC PANEL PC 877 Operating Instructions Manual

Maintenance and service
12.4 Installing and removing hardware components
12.4.5.4

Removing and installing a 3.5" hard disk

Procedure
1. Unscrew the 4 screws from the drive housing and slide the drive out. The drive is secured
2. Note the cable arrangement and then remove the cables from the motherboard.
Figure 12-8
3. Loosen the 4 screws that secure the hard disk to the drive bay.
4. Remove the drive from the bracket.
Reverse the procedure to install the drive.
12-24
to the underside of the drive housing.
Removed hard disk
Operating instructions, Release 07/2006, A5E00877780-01
SIMATIC Panel PC 877