Installing / Removing Hard Disk Drives In The Fixed Hard Disk Rack - Siemens SIMATIC PC 847B Operating Instructions Manual

Expansions and programming
10.4 Installing drives
10.4.4

Installing / removing hard disk drives in the fixed hard disk rack

Preparations
1. Unplug the device from mains and disconnect all cables.
2. Open the device
Installing a drive
How to install a drive
1
2
Removing drives
How to remove a drive
1
2
74
Place the drive (1) or (2) onto the
drive tray and secure it using four
screws (3) or (4).
Connect the power and data cables
to the disk drive.
Disconnect the power and data
cables from the drive.
Remove the four screws (3) or (4)
and take the drive out of the
housing.
SIMATIC Rack PC 847B
Operating Instructions, 06/2008, A5E02203168-01