Table of Contents
Advertisement
6 Troubleshooting
6.3 Fuse replacement
When the power cannot be turned on even when the power is
properly supplied to the camera and when connections with
peripheral equipment are proper, the fuse may be blown. If
the fuse is blown, replace by following the procedure below.
1
Turn off the AC adapter power and pull out the
DC power supply cable.
2
Remove two screws and the blank panel (if any
optional panel is attached, remove the option
panel).
Screws
Blank panel
3
Remove the following fuse and attach a new
fuse.
Caution
Use the designated fuse or an equivalent one.
Fuse to be used
Model: 1044-0001
Housing color: Blue
Rated current: 15A
46
UHL-43 2005 VER1 (E)
Advertisement
Table of Contents
