Omron SYSMAC C Series Operation Manual page 183

Data Exchange with CPU Unit
Words Bits Output
points
41 0 to 15 1
42 0 to 15
0 to 15 2
43
44 0 to 15
45 0 to 15 3
46 0 to 15
0 to 15 4
47
48 0 to 15
172
Name
Output Lower Output lower limit for output
Limit for Output point 1. This is used to restrict
Point 1 the output signal range. When
the scaling function is enabled,
data is set in engineering units.
Output Upper Output upper limit for output
Limit for Output point 1. This is used to restrict
Point 1 the output signal range. When
the scaling function is enabled,
data is set in engineering units.
Output Lower Output lower limit for output
Limit for Output point 2. This is used to restrict
Point 2 the output signal range. When
the scaling function is enabled,
data is set in engineering units.
Output Upper Output upper limit for output
Limit for Output point 2. This is used to restrict
Point 2 the output signal range. When
the scaling function is enabled,
data is set in engineering units.
Output Lower Output lower limit for output
Limit for Output point 3. This is used to restrict
Point 3 the output signal range. When
the scaling function is enabled,
data is set in engineering units.
Output Upper Output upper limit for output
Limit for Output point 3. This is used to restrict
Point 3 the output signal range. When
the scaling function is enabled,
data is set in engineering units.
Output Lower Output lower limit for output
Limit for Output point 4. This is used to restrict
Point 4 the output signal range. When
the scaling function is enabled,
data is set in engineering units.
Output Upper Output upper limit for output
Limit for Output point 4. This is used to restrict
Point 4 the output signal range. When
the scaling function is enabled,
data is set in engineering units.
Description
With No Scaling
BCD:
0 to 4095
(0000 to 4095
or or
–2048 to 2048
(A048 to 2048
Binary:
0000 to 0FFF
or or
F800 to 07FF
With Scaling
BCD:
–7999 to 7999
(F999 to 7999 (F999 t 7999
Binary:
–32767 to 32767
(8001 to 7FFF
Be sure to set Be sure to set
values within the
allowable range
regardless of
whether the
upper/lower limit upper/lower limit
function is
enabled. If values
outside the range
are set, the
Upper/Lower Limit
Over Flag and Over Flag and
other related flags
may turn ON.
Section
Data Default Read: R
Write: W
Lower R/W
limit:
0000
Hex
Upper
)
Hex
limit:
4095 4095
Hex
)
Hex
Hex
Hex
) )
Hex
)
Hex
9-3