To Select Paper Size Automatically (Auto Paper Select) - Konica Minolta bizhub PRO 920 Operation Manual

Hide thumbs Also See for bizhub PRO 920:

Table of Contents

Basic Job Settings

To Select Paper Size Automatically (Auto Paper Select)

Auto Paper Select detects the original size placed on the ADF or original

glass and automatically selects and feeds copy paper of the same size, or

selects an appropriate size according to the magnification ratio selected.

If "Auto Paper Select" appears on the [Paper] key of the Basic Screen,

the function is already activated. You can start copying without

performing the following procedure.

The original sizes to be detected from the ADF or original glass are

previously determined. See "Using Original Glass" on page 3-11 for

The original sizes to be detected from the ADF or original glass can be

changed by the administrator. Refer to "Utility <Administrator Setting>"

on page 18-3.

The administrator can designate the tray or paper condition incompatible

with Auto Paper Select. Refer to "Paper Setting" on page 15-3.

The administrator can deactivate Auto Paper Select when original is set

in the ADF or on the original glass. Refer to "2 Each Function Setting" on

bizhub PRO 920