Omron SCARA YRC Series User Manual page 8

[Precautions for starting and maintenance]
WARNING
• DO NOT TOUCH THE TERMINALs WHILE THE POWER Is ON. FAILURE TO OBsERvE
THIs COULD LEAD TO MALFUNCTIONING.
• ALWAYs sHUT OFF ALL PHAsEs OF THE POWER sUPPLY ExTERNALLY BEFORE
CLEANING OR TIGHTENING THE TERMINAL sCREWs. FAILURE TO sHUT OFF ALL
PHAsEs COULD LEAD TO ELECTRIC sHOCks, PRODUCT DAMAGE OR
MALFUNCTIONING. A LOOsE sCREW COULD LEAD TO DROPPING, sHORT-
CIRCUITING OR MALFUNCTIONING. IF THE sCREW Is TOO TIGHT, sHORT-
CIRCUITING OR MALFUNCTIONING COULD OCCUR DUE TO sCREW DAMAGE.
• NEvER DIsAssEMBLE OR MODIFY ANY OF THE ROBOT CONTROLLER MODULEs.
FAILURE TO OBsERvE THIs COULD LEAD TO TROUBLE, MALFUNCTIONING,
INJURIEs OR FIREs.
• ALWAYs sHUT OFF ALL PHAsEs OF THE POWER sUPPLY ExTERNALLY BEFORE
INsTALLING OR REMOvING THE DEvICENET COMPATIBLE MODULE. FAILURE
TO sHUT OFF ALL PHAsEs COULD LEAD TO ROBOT CONTROLLER TROUBLE OR
MALFUNCTIONING.
• WHEN UsING THE ROBOT CONTROLLER WITH THE DEvICENET COMPATIBLE
MODULE MOUNTED, ALWAYs MOUNT THE ENCLOsED FERRITE CORE FOR NOIsE
MEAsUREs ON THE POWER CABLE As CLOsE TO THE ROBOT CONTROLLER As
POssIBLE.
FAILURE TO MOUNT THIs FERRITE CORE COULD LEAD TO MALFUNCTIONING
CAUsED BY NOIsE.
CAUTION
THE DEvICENET sYsTEM MAY NOT FUNCTION PROPERLY IF THE MAsTER MODULE
AND ROBOT CONTROLLER POWER ARE TURNED ON sIMULTANEOUsLY. ALWAYs
TURN THE ROBOT CONTROLLER POWER ON AFTER TURNING ON THE POWER FOR
THE MAsTER MODULE ON.
[Precautions for disposal]
CAUTION
DIsPOsE OF THIs PRODUCT As INDUsTRIAL WAsTE.
This manual does not guarantee the implementation of industrial rights or other rights,
and does not authorize the implementation rights. OMRON shall not be held liable for any
problems regarding industrial rights that occur through the use of the contents given in this
manual.
6
2010 OMRON EUROPE, B.V.