Table of Contents
Advertisement
3. Direct connection by emulated serialization on parallel DIO
2. Direct connection from DI n ( ) to SO n ( )
Parallel port input can be directly connected to serial port output. The relation of the parallel
port and serial port that can be connected is as follows.
Input device such as valve
DI port → SO port
DI2()
DI3()
Chapter
DI4()
3
DI5()
NOTE
When the port specified by sIO is identical with the port used by the program, the output results
might be inaccurate.
[Operation]
1) select a DI port (from items 5 to 8) in the "sYsTEM > OPTION > sIO" mode.
2) Press the
ＳＹＳＴＥＭ＞ＯＰＴＩＯＮ＞ＳＩＯ Ｖ８．０１
４．Ｄｉｒｅｃｔ ＳＩ５（） −＞ ＤＯ５（） ＮＯ
５．Ｄｉｒｅｃｔ ＳＯ２（） ＜− ＤＩ２（） ＮＯ
６．Ｄｉｒｅｃｔ ＳＯ３（） ＜− ＤＩ３（） ＮＯ
７．Ｄｉｒｅｃｔ ＳＯ４（） ＜− ＤＩ４（） ＮＯ
８． Ｄｉｒｅｃｔ ＳＯ５（） ＜− ＤＩ５（）
ＳＥＴ ＮＯ
3) Press the
setting.
4) Press the
continue setting.
3-10
sO2()
sO3()
sO4()
sO5()
F 1
(EDIT) key.
F 1
(sET) key to enable the connection or the
key to quit setting or select another DI port with the cursor (↑/↓) keys to
ESC
v 1.23M
ＮＯ
F 2
(NO) key to cancel the
Advertisement
Table of Contents
