Chapter 6 Security Setup; Cp6500-V Password Support; Two Levels Of Password Protection; Remember The Password - Kontron CP6500-V User Manual

Chapter 6

CP6500-V Password Support

Two Levels of Password Protection

CP6500-V provides both a Supervisor and a User password. If you use both passwords,
the Supervisor password must be set first.
The system can be configured so that all users must enter a password every time the
system boots or when CP6500-V Setup is executed, using either or either the Supervisor
password or User password.
The Supervisor and User passwords activate two different levels of password security.
If you select password support, you are prompted for a one to six character password.
Type the password on the keyboard. The password does not appear on the screen when
typed. Make sure you write it down. If you forget it, you must drain NVRAM and
reconfigure.

Remember the Password

Keep a record of the new password when the password is changed. If you forget the
password, you must erase the system configuration information in NVRAM. See
(Deleting a Password) for information about erasing system configuration information.
Chapter 6: Security Setup
Security Setup
Cont'd
35