Accessories - Waters Prep Series Installation And Maintenance Manual

Injector panel (PrepLC system)
Purge valve
Optional rheodyne 7725 injector site
Rheodyne 3725i injector Optional scale select valve site
Solvent flows from the inlet port to the purge valve. When you set the purge
valve to Pump Purge, solvent flows to the purge outlet. When you set the
purge value to System, it flows through the injector to the column.

Accessories

Several Waters Prep Series options let you to expand your system's capability.
Waters fraction collector
You can program controller event options to integrate a Waters Fraction
Collector as part of the Waters Prep Series. You can program the fraction
collector itself for maximum flexibility and productivity.
SE 120 chart recorder
The SE™ 120 is a two-pen recorder that can simultaneously plot two analog
signals whose full-scale range is from 0 to 10 mV to 0 to 10 VAC.
M-1000 PrepPak module
This product is the compression chamber module for Waters PrepPak
cartridges. The pneumatically operated M-1000 PrepPak module applies
radial compression to the flexible walls of a Waters PrepPak cartridge,
creating a stable, uniform bed.
Waters Prep series 1-13