Backplane Cover; Removing The Backplane Cover - Dell EMC PowerEdge R6400 Installation And Service Manual

Figure 27. Installing the system cover
Next steps
1 Reconnect the system to the electrical outlet.
2 Turn on each sled in the system, including all the attached peripherals.

Backplane cover

Removing the backplane cover

Prerequisites
NOTE: This procedure is not applicable for enclosures with the 3.5 inch hard drive configuration.
1 Follow the safety guidelines listed in
2 Follow the procedure listed in
Steps
1 Using the Phillips #1 screwdriver, remove the screws that secure the backplane cover to the enclosure.
2 Slide the backplane cover toward the back of the enclosure and lift the cover away.
50 Installing and removing enclosure components
Safety instructions.
Before working inside your system.