Chapter 4: Installing The Gs970Emx/10 Switch On A Wall; Introduction; Figure 24: Brkt-J23 Bracket Kit; Figure 25: Gs970Emx/10 Switch Wall Installations With Two Brkt-J23 Brackets - Allied Telesis GS970EMX/10 Installation Manual

Chapter 4: Installing the GS970EMX/10 Switch on a Wall

Introduction

60
Installing the GS970EMX/10 switch on a wall requires the BRKT-J23
bracket kit. The kit contains two identical brackets. Refer to Figure 24.
Figure 24. BRKT-J23 Bracket Kit
Note
The BRKT-J23 bracket kit is sold separately.
You can install the switch with the front panel facing up, left or right, with
two or four brackets. Figure 25 shows the switch with two brackets.
Figure 25. GS970EMX/10 Switch Wall Installations with Two BRKT-J23
Brackets