Secondary C300 Controller With No Memory Retention - Honeywell Experion C300 User Manual

Communication and system time startup fault scenarios

Secondary C300 Controller with no Memory Retention

Controller Faceplate
Status Blinking
Red ->
LED
Green
FTE Blinking
Green
LEDs
Display TS for 1
min.
then ->
IDLE
CB icon Red
Status Blinking
Orange ->
LED
Orange
FTE Blinking
Green
LEDs
Display IDLE
CB icon Grey
Status Green
LED
FTE Blinking
Green
LEDs
Display IDLE
CB icon Blue
Secondary C300 Controller with no Memory Retention
Controller Faceplate
Status Blinking
Red
LED
246
Problem
Communication on FTE
network
• Communication via CDA
• Unable to establish
connection to system time
source
Communication on FTE
network
• No communication via CDA
• Established connection to
system time source
Controller transitions to
secondary redundancy role
assuming its partner has CDA
available.
None. Normal operation for
redundant controller with
battery backup following a
power cycle.
Problem
No communication on FTE
network.
Experion C300 Controller User's Guide
Honeywell
C300 Block Station Alarm
Time Source
CDA Not Using
Configured
Timesource
SNTP CDA Comm Lost
Connection
SNTP None
C300 Block Station Alarm
Time Source
None None
Resolve
Note 3
Note 4
None.
Resolve
Note 1
R301.1
11/06