Honeywell Experion C300 User Manual page 96

C300 Controller Block
Redundancy tab
Plain Text
Disable
Synchronization
Become Primary
Enable
Synchronization
Initiate Switchover
Redundancy Status
Auto Synchronization
State
Redundancy
Compatibility
Inhibit Sync Reason
Initial Sync Progress
(%)
80
Parameter Name
DSBLSYNCCMD
BECMPRICMD
ENBLSYNCCMD
SWITCHCMD
RDNAUTOSYNC
RDNCMPT
RDNINHIBITSYNC
RDNSYNCPROG
Experion C300 Controller User's Guide
Honeywell
User
Configurable
Monitoring Triggers a synchronizing/
only synchronized/standby
redundant controller pair
to abort synchronization.
Monitoring Triggers an
only unsynchronized secondary
controller to transition into
the primary role in the
absence of a partner
controller.
Monitoring
Triggers an
only unsynchronized redundant
controller pair to attempt
initial-synchronization.
Monitoring Triggers a redundancy
only role change where the
original primary controller
reboots into the secondary
role and the Synchronized
or Standby secondary
controller assumes the
primary role to continue
control operations.
No Shows current auto
synchronization state. If
enabled, not synchronized
controllers will attempt to
synchronize automatically
when conditions permit.
No Shows redundant partner
compatibility.
No Shows the reasons for
inhibiting initial-sync.
No Shows current
synchronization progress
in percent.
Notes
R301.1
11/06