Create a Control Module
To create and save a Control Module.
WARNING
All edits done on project-related objects must be reloaded to the controller
before those edits can be seen in the controller. See Control Strategy
Loading for information on how to load control strategy objects.
To create and save a Control Module.
Step
1
Click File -> New -> Control Module
A blank Control Module is opened up in the Control Drawing area, (shown in
the figure above).
The new Control Module appears under the Unassigned Project Tree. Control
Module names are sequentially numbered (for example, CM_30, CM_31,
etc.).
The new Control Module is automatically saved to your harddrive.
2
Select Edit -> Module Properties... or double-click with the mouse cursor
located anywhere inside the chart to open the Control Module parameter
configuration form for input.
58
Action
Experion C300 Controller User's Guide
Honeywell
R301.1
11/06