Introduction
Locating related documentation
Locating related documentation
Listed here are Knowledge Builder documents that contain general information for
planning and implementing control hardware and network communications in your
Experion system:
Control Hardware Planning Guide - Provides general information to assist you in
planning and design of control hardware in an Experion system. Control hardware
includes C200 Controllers, Series A Chassis I/O and FIMs, also, all I/O families, (except
Series C I/O). It includes some supervisory network considerations for general reference.
Series C I/O Module User's Guide - The guide contains planning and implementation
information for Series C I/O modules. Module types include: AI, AO, AIMUX, DI and
DO.
Series C Fieldbus Interface Module User's Guide - Provides planning and
implementation guide for the Series C Fieldbus Interface Module4.
Control Firewall User's Guide – A hardware and installation reference about the FTE
switch component for Series C control hardware.
Fault Tolerant Ethernet Overview and Implementation Guide - Provides basic
installation instructions and configuration requirements for a Fault Tolerant Ethernet
(FTE) network and its components.
Fault Tolerant Ethernet Installation and Service Guide - Contains instructions for
installing and configuring a Fault Tolerant Ethernet (FTE) node. The guide includes
troubleshooting and service information for an FTE node.
Fault Tolerant Ethernet Bridge User Guide - Provides information for implementing a
Fault Tolerant Ethernet supervisory network through the FTE Bridge module. It
includes module installation, configuration, operation and service data.
Process Manager I/O Troubleshooting and Maintenance Guide - Guide features
notification messages (soft fail codes and hard fail codes), service procedures and parts
lists for PMIO I/O control hardware.
2
Experion C300 Controller User's Guide
Honeywell
R301.1
11/06