Connecting Devices (Binding); With The Evohome Controller - Honeywell HCE80R Mounting And Operation Instructions

14

Connecting devices (binding)

Binding room setpoint generators/sensors with the evohome controller
DTS92A(E)
Option
evohome controller
If you do not follow the
GUIDED CONFIGURATION, observe the
steps on your evohome controller:
1. Press "SET" on the evohome controller
and keep it pressed for 3 seconds.
2. Press the green check mark
3. Press ADD ROOM.
4. Select the room that you want to add and
then select UNDERFLOOR HEATING.
5. A room setpoint generator/sensor
HCW82/HCF82/DTS92 has to be
connected with the evohome controller
for each room that is controlled with the
underfloor heating controller.
Repeat this procedure for each room (zone)
with an underfloor heating.
Connecting devices (binding)
HCW82 HCF82
evotouch
.
green tick button
guided installation menu
red cross button
schedule schedule edit
evotouch bind button
quick actions
forward button
back button custom
economy
installation menu 'exit' button
away
With the evohome controller each
zone can be controlled separately
with an individual time program.
For information on installing the device please
read the evohome installation instructions.
!
Ensure that the room that you add to
the evohome controller corresponds to
the correct underfloor heating room.
home
guided
schedule wizard
settings
ADD
ZONE
ADD
GATEWAY
RF COMMS
CHECK