Viewing Flash Log; Viewing Release Information Log; Checking Server Point Build Log; Checking Server Point Build Error Log - Honeywell Experion C300 User Manual

Fixing common problems

Viewing flash log

Viewing flash log
The Flash.txt log provides a list of firmware updates that have been initiated.
To view the log, navigate to this file location on the server:
C:\Program Files\Honeywell\Experion\Engineering Tools\system\bin\Flash.txt.

Viewing release information log

The ReleaseInfo.txt log provides a list of Experion software releases that have been
installed on the computer.
To view the log, navigate to this file location on the server:
C:\Program Files\Honeywell\Experion\Engineering Tools\system\bin\ReleaseInfo.txt.

Checking server point build log

The SvrPtBld.txt log provides list of process (CB) points built in the server database.
To check the log, navigate to this file location on the server:
C:\Program Files\Honeywell\Experion\Engineering Tools\system\temp\SvrPtBld.txt.

Checking server point build error log

The svrptblderr.txt log provides list of any errors associated with process (CB) points
built in the server database
To check the log, navigate to this file location on the server:
C:\Program Files\Honeywell\Experion\Engineering Tools\system\temp\svrptblderr.txt.

Checking error log

The Errlog_n.txt log provides a running list of Control Builder detected errors in
chronological order. The n represents any number that is assigned to the most recent log.
To check the log, navigate to this file location on the server:
C:\Documents and Settings\All Users\Application Data\Honeywell\Experion\Errlog_n.txt.
Fixing common problems
This section identifies some common problems and describes how you might fix them.
220 Experion C300 Controller User's Guide
Honeywell
R301.1
11/06