Non-Redundant C300 Controller With Memory Retention - Honeywell Experion C300 User Manual

Communication and system time startup fault scenarios

Non-redundant C300 Controller with Memory Retention

Controller Faceplate
CB icon Grey
Status Blinking
Green
LED
FTE Blinking
Green
LEDs
Display NODB
CB icon
Yellow
Non-redundant C300 Controller with Memory Retention
Controller Faceplate
Status Blinking
Red ->
LED
Green
FTE Off
LEDs
Display BP for 2
min. TS
for 3 min.
then IDLE
CB icon Red
Status Blinking
Red ->
LED
Green
FTE Blinking
Green
LEDs
Display TS for 3
min. then
-> IDLE
CB icon Grey
242
Problem
None. Normal operation for
non-redundant controller with
no battery backup following a
power cycle.
Problem
No communication on FTE
network.
Communication on FTE
network.
• No communication via CDA
• Unable to establish
connection to system time
source
Experion C300 Controller User's Guide
Honeywell
C300 Block Station Alarm
Time Source
SNTP C300 Not
Synchronized
C300 Block Station Alarm
Time Source
Internal C300 OFFNET
Internal CDA Comm Lost
Connection
Resolve
None.
Resolve
Note 1
Note 2
R301.1
11/06