Honeywell Experion C300 User Manual page 54

Create C300 Controller and CEE function blocks
To configure a C300 Controller block
Step
5
Check the box if the controller will be one
of a redundant pair. If you check the
box, the Secondary Tag Name will
appear in the Redundancy Configuration
box.
6
The Alarming Enabled check box
contains a check (default).
7
Click on the Temperature High Alarm
(deg. C) field.
Enter a temperature at which an alarm is
generated for controller hardware
temperature. Press <Tab>.
8
Accept the default or key in desired
value.
Note: Do not set lower than the default
value of 20%.
9
Click Server History tab.
38
Action
Experion C300 Controller User's Guide
Honeywell
Result
C300 Controller is configured as either
nonredundant or redundant with a
Secondary C300 Controller block added
when the Primary controller FB
configuration form is closed.
To disable alarming for the parameters in
the Advanced Configuration box, clear
the Alarming Enabled check box.
Moves cursor to the CPU Free Low
Alarm (%) field.
Calls up the Server History configuration
form.
R301.1
11/06