Table of Contents
Advertisement
Input Submenu
This submenu allows you to perform certain input adjustments.
Figure 15.
From the Input submenu, you can configure the following:
Active Video — This view-only field shows the width in pixels (the H value) and the
•
height in lines (the V value) of the applied input signal.
•
HDCP Authorized — Lets you enable or disable HDCP communication by selecting
whether the DSC input reports to the source as an authorized HDCP sink. After
pressing Enter to select this item, press the
(default) and Off.
Setting HDCP authorization to Off is useful for devices that always encrypt their
output if the downstream sink is capable of HDCP. If HDCP Authorized is disabled,
most content from these sources can be passed as a non-encrypted signal. In a video
system that should not transmit HDCP encrypted data, such as broadcast or streaming
environments, HDCP authorization should be disabled at the input to ensure that the
output remains unencrypted.
Input Submenu
DSC 401 and DSC 401 A User Guide • Operation
button to toggle between On
or
20
Advertisement
Table of Contents
