Sfr Definition 7.6. Cpt1Md: Comparator1 Mode Selection - Silicon Laboratories C8051F341 Product Manual

SFR Definition 7.6. CPT1MD: Comparator1 Mode Selection

R/W R/W
- - CP1RIE
Bit7 Bit6
Bits7–6: UNUSED. Read = 00b, Write = don't care.
Bit5: CP1RIE: Comparator1 Rising-Edge Interrupt Enable.
0: Comparator1 rising-edge interrupt disabled.
1: Comparator1 rising-edge interrupt enabled.
Bit4: CP1FIE: Comparator1 Falling-Edge Interrupt Enable.
0: Comparator1 falling-edge interrupt disabled.
1: Comparator1 falling-edge interrupt enabled.
Bits1–0: CP1MD1–CP1MD0: Comparator1 Mode Select.
These bits select the response time for Comparator1.
Mode CP1MD1
0
1
2
3
* See Table 7.1 for response time parameters.
C8051F340/1/2/3/4/5/6/7/8/9/A/B/C/D
R/W R/W R/W
CP1FIE -
Bit5 Bit4 Bit3
CP1MD0 CP1 Response Time*
0 0 Fastest Response
0 1
1 0
1 1 Lowest Power
Rev. 1.3
R/W R/W R/W
- CP1MD1 CP1MD0 00000010
Bit2 Bit1 Bit0
Reset Value
SFR Address:
0x9C
67