Table of Contents
Advertisement
Contents and general safety instructions
Intended use
Range of application and certifications
Festo P.BE-CDVI-EN en 1202e
The valve terminals described in this manual are intended
for fitting into a machine or automated system. Please
observe the safety regulations specified in this manual
as well as the instructions concerning the intended use
of the specific valve terminal. The valve terminals may
only be used as follows:
–
As specified in industrial applications.
–
In original condition without unauthorised alterations.
Only the conversions or modifications described in the
documentation supplied with the product are permitted.
–
In perfect technical condition.
When used together with commercially available compo-
nents, such as actuators, the specified limits for pressures,
temperatures, electrical data, torques etc. must be observed.
National and local safety regulations must also be observed.
If implementing an emergency stop function, note the
measures listed in Chapter 3.3.3.
The product fulfils the requirements of EU directives and is
marked with the CE marking.
Standards and test values, which the product must comply
with and fulfil, can be found in the section "Technical data".
The product-relevant EU directives can be found in the declar-
ation of conformity.
V
Advertisement
Chapters
Table of Contents
