5. Cleaning, maintenance and conversion
5.2
General preventive action
5-6
Warning
Uncontrolled movements of the connected actuators and
uncontrolled movements of loose tubing can cause injury
to persons and/or damage to property.
Make sure that the higher-order controller has not sent
•
control signals to the solenoid coils.
Before carrying out conversion work on the CDVI, switch
•
off the following:
– The compressed air supply
– The power supply
The CDVI is supplied pre-assembled from the factory. If you
wish to supplement or replace individual components, please
note the following:
Festo P.BE-CDVI-EN en 1202e