Festo CDVI-DN Description page 37

2. Assembly
1
Earthed mounting surface
2
Spacer bolt, tightening torque 10 Nm
(±2 Nm)
Fig. 2/2: Example of vertical attachment
Festo P.BE-CDVI-EN en 1202e
4. Fasten the terminal conductively with the earthed mounting
surface (see Fig. 2/2). If necessary use washers. The ter-
minal can be mounted in any desired position, but the CDVI
should be mounted so that dirt will be washed out during
cleaning and the cleaning agent can drip off.
3
Manifold block with threaded holes
for spacer bolts
1
2
3
2-7