Festo CDVI-DN Description page 88

5. Cleaning, maintenance and conversion
1
Manifold block
2
Separator plate
without channel
separation
3
Standard
expansion block
4
Right-hand end
plate
5
Guide sleeves
Fig. 5/2: Adding valve positions on the CDVI without pressure zones
5.5.2 Pilot air supply
5-14
1 2
8. Fit the CDVI (see section 5.3).
By fitting the appropriate right-hand end plate, you can oper-
ate your CDVI with internally branched or externally supplied
pilot air.
Mixed operation of the CDVI with internal and external pilot
air supply is not intended. The optionally available separator
plates do not separate the pilot air supply channel.
3 2 3 4
5 5 2 5
Festo P.BE-CDVI-EN en 1202e