Festo CDVI-DN Description page 89

5. Cleaning, maintenance and conversion
Components
Right-hand end plate
Blanking plug for connection 12/14
Tab. 5/2: Components for conversion to internal or external pilot air supply
Festo P.BE-CDVI-EN en 1202e
You will require the following components:
Internal pilot
air supply
CDVI5.0-EPR
CDVI5.0-B-G1/8
To facilitate mounting the end plate, Festo recommends that
you dismantle the CDVI from its mounting surface. If the CDVI
is easily accessible, conversion of the end plate can also be
undertaken without the need for you to dismantle the valve
terminal.
Procedure:
1. Please observe the general preventive actions
(see section 5.2).
2. Dismantle the CDVI if necessary (see section 5.3).
3. Exchange the end plate (see section 5.5.4 "End plates")
4. Fit the CDVI if necessary (see section 5.3).
External pilot
air supply
CDVI5.0-EPR-S
--------------------
5-15