Festo CDVI-DN Description page 86

5. Cleaning, maintenance and conversion
Component
Expansion block:
for CDVI with 2 pressure zones
–
Standard expansion block
for CDVI with 3 or more pressure zones
–
Standard expansion block for the
pressure zone on the outside right
per internal pressure zone
–
one expansion block with additional
pneumatic supply code X
Separator plates:
one separator plate per expansion block:
–
Without channel separation
–
Channel 1 blocked
–
Channel 3/5 blocked
–
Channels 1 and 3/5 blocked
Corresponding number of valves
One blanking plate per unused valve
position
Tab. 5/1: Components for extending valve terminals
5-12
For extending the CDVI, you will require the following compo-
nents:
Electrical connection variant of the CDVI
CDVI-MP
CDVI5.0-
-EB1-MP...
or
-EB2-MP-...
-EB1-MP-...
or
-EB2-MP-...
-EB1X-MP-...
or
-EB2X-MP-...
CDVI5.0-EB-DZ
CDVI5.0-EB-DZP
CDVI5.0-EB-DZR
CDVI5.0-EB-DZPR
For an overview of the valve types, see chapter 1,
Tab. 1/4
CDVI5.0-AP-2
CDVI-FB
Without With additional
additional electr. supply
electr. supply (code Z)
CDVI5.0- CDVI5.0-
-EB1-DN-... -EB1Z-DN-...
or or
-EB2-DN-... -EB2Z-DN-...
-EB1-DN-... -EB1Z-DN-...
or or
-EB2-DN-... -EB2Z-DN-...
-EB1X-DN-... -EB1XZ-DN-...
or or
-EB2X-DN-... -EB2XZ-DN-...
Festo P.BE-CDVI-EN en 1202e