Wall Mounting - Festo CDVI-DN Description

2. Assembly

2.1.1 Wall mounting

Components of the CDVI
1)
Basic weight:
–
CDVI with 4 valve positions
–
CDVI with 8 valve positions
Expansion block with 1 valve position
–
With/without additional supply
Expansion block with 2 valve positions:
–
With/without additional supply
Valve
Blanking plate
Multi-pin connecting cable per metre
Spacer bolt
1)
Manifold block, without: separator plates, left-hand and right-hand end plates, pneum.
threaded connectors, cable, valve
2)
Expansion block without: separator plate and pneum. threaded connectors, valves
Tab. 2/1: Weight specifications for the CDVI
Festo P.BE-CDVI-EN en 1202e
It may be sensible to connect the tubing prior to mounting
the CDVI, depending on the space available for mounting.
The tubing of the terminal is described in chapter 3.
Caution
The CDVI can bend and therefore become damaged and
may leak if it is mounted on an uneven and pliable surface.
Mount the CDVI only on an even rigid surface.
•
Procedure:
1. Ascertain the weight of your terminal (weigh or calculate).
Guidelines:
2)
2)
Weight
CDVI-MP CDVI-FB
approx. 1050 g approx. 1320 g
approx. 2090 g approx. 2360 g
approx. 255 g
approx. 510 g
approx. 210 g/item
approx. 85 g/item
approx. 168 g/m ---
approx. 80 g/item
2-5