3. Installation
Contents of this chapter
Further information
Festo P.BE-CDVI-EN en 1202e
This chapter deals with the tubing and cabling of the CDVI.
These include in particular the following:
–
General instructions on preparing the compressed air and
on connecting the tubing
–
Instructions on operating the pilot control with internal or
external pilot air supply
–
Instructions on operating the valve terminal with pres-
sure-zone separation
–
Fitting the QS threaded connectors
–
Connecting the power supply
–
Earthing the CDVI
–
Address assignment of the valves
Instructions on connecting the electric components of the
CDVI with MP connection can be found in the brief description
"CDVI with multi-pin plug connection."
Instructions on connecting the electric components and on
addressing the CDVI with DI connection "DeviceNet" can be
found in the electronics manual P.BE-CDVI-DN-..
3-3