Eaton Network Card-MS User Manual page 8

- Chinese Simplified
- Japanese
- Korean
- Chinese Traditional
- Russian
- Czech
Online Help (English only)
l
Card firmware updated through the network
l
Fast Ethernet 10/100 MB compatibility with auto-negotiation on the RJ-45 port
l
Recording of events and measurements in the card log
l
Connection to the card with straight Category 5 RJ-45 network cables [maximum card distance is
l
20m (65 ft)]
Can be installed while the UPS is online, maintaining the highest system availability
l
Secure management through Simple Network Management Protocol SNMP v3
l
Support of dual stack IPv4/IPv6
l
Compatibility with the following Management Information Bases (MIBs):
l
- MIB II (RFC 1213)
- Internet Engineering Task Force (IETF) Standard UPS MIB (RFC 1628)
- Eaton PowerMIB
- Eaton Pulsar MIB (MGE MIB)
NOTE See Chapter 5, "MIB Objects" on page 63.
Eaton Network Card-MS User's Guide P-164000100—Rev 1 www.eaton.com/powerquality
Introduction
2