Communication Identification Label - ABB PVS-50-TL Product Manual

MODEL NAME
P/N:PPPPPPPPPPP
WO:XXXXXXX
SO:SXXXXXXXX Q1
SN:YYWWSSSSSS WK:WWYY
POWER-ONE ITALY S.p.A
Via S.Giorgio 642, Terranuova Bracciolini (AR), 52028, Italia
The officially required information is located on the approval label. The identification label
is an accessory label which shows the information necessary for the identification and cha-
racterisation of the inverter by ABB.
The labels are NOT to be hidden by foreign objects and parts (rags, boxes, equipment, etc.);
they must be regularly cleaned and always kept in sight.
C
ommunication identification label
SN WLAN: SSSSSSSSSS
PN WLAN: PPP.PPPPP.PP
Mac Address:
XX:XX:XX:XX:XX:XX
Remove and apply on the Quick installation guide
SN WLAN: SSSSSSSSSS
SN Inverter: SSSSSSSSSS
MAC: XX:XX:XX:XX:XX:XX
PK: KKKK-KKKK-KKKK-KKKK
The Communication Identification label is divided in two separate parts by a dashed line; take
the bottom part and apply it on the plant documentation. (it's recommend to create a plant
map and apply the Communication Identification label of each inverters in the right position
of that map).
In addition to the label showing the inverter data, there is an additional
identification label for the inverter.
The label displays the following information:
• Inverter model
• Inverter Part Number
• Inverter Serial Number consisting of:
- YY = Year of manufacture
- WW = Week of manufacture
- SSSSSS = sequential number
• Week/Year of manufacture
• Manufacturer
An additional Communication Identification label is applied on the wiring
box. The label displays the following information:
• WLAN board Serial Number
• WLAN board Part Number
• MAC address:
- To be used to obtain the SSID of the wireless access point
created by the inverter: ABB-XX-XX-XX-XX-XX-XX
(where "X" is a hex digit of the MAC address).
- To be used to obtain the "Host Name":
http://ABB-XX-XX-XX-XX-XX-XX.local
(where "X" is a hex digit of the MAC address).
- MAC address it's the only required information to register the
inverter with Aurora Vision.
• Inverter Serial Number
• Product Key:
To be used as wireless access point password, or to be used to
access to the Web UI as username and password in case of lost
credentials, and to commission inverter using ABB Installer for
Solar Inverters.
- 16 -
2 - Characteristics