HYPER-AL SBC
Primary IGFX Boot Display [Auto]
Use the Primary IGFX Boot Display option to select the display device used by the
system when it boots. Configuration options are listed below.
Auto
HDMI1
LVDS
On board LVDS [Disabled]
Use the On board LVDS option to enable or disable the LVDS connector.
Disabled
Enabled
Backlight Control Mode [LED]
Use the Backlight Control Mode option to specify the backlight control mode.
Configuration options are listed below.
LED
CCFL
Backlight Control Type [PWM]
Use the Backlight Control Type option to specify the backlight control type.
Configuration options are listed below.
PWM
DC
Backlight Control Voltage Level [3.3V]
Use the Backlight Control Voltage Level option to specify the voltage of the power
supplied to the LCD panel. Configuration options are listed below.
3.3V
5.0V
D
EFAULT
D
Disable LVDS.
EFAULT
Enabled LVDS.
D
EFAULT
D
EFAULT
D
EFAULT
Page 67