Iwdd Super Io Configuration; Serial Port 1 Configuration; Bios Menu 5: Iwdd Super Io Configuration; Bios Menu 6: Serial Port 1 Configuration - IEI Technology HYPER-AL series User Manual

HYPER-AL SBC

5.3.3 iWDD Super IO Configuration

Use the iWDD Super IO Configuration menu (BIOS Menu 5) to set or change the
configurations for the serial ports.
Aptio Setup Utility – Copyright (C) 2018 American Megatrends, Inc.
Advanced
iWDD Super IO Configuration
Super IO Chip
> Serial Port 1 Configuration
Version 2.18.1263. Copyright (C) 2018 American Megatrends, Inc.

BIOS Menu 5: iWDD Super IO Configuration

5.3.3.1 Serial Port 1 Configuration

Use the Serial Port 1 Configuration menu (BIOS Menu 6) to configure the serial port 1.
Aptio Setup Utility – Copyright (C) 2018 American Megatrends, Inc.
Advanced
Serial Port 1 Configuration
Serial Port
Device Settings
Change Settings
Version 2.18.1263. Copyright (C) 2018 American Megatrends, Inc.

BIOS Menu 6: Serial Port 1 Configuration

iWDD
[Enabled]
IO=3F8h; IRQ=4
[Auto]
Set Parameters of Serial
Port 1 (COMA)
---------------------
: Select Screen
↑ ↓: Select Item
Enter Select
F1 General Help
F2 Previous Values
F3 Optimized
Defaults
F4 Save
ESC Exit
Enable or Disable Serial
Port (COM)
---------------------
: Select Screen
↑ ↓: Select Item
Enter Select
F1 General Help
F2 Previous Values
F3 Optimized
Defaults
F4 Save
ESC Exit
Page 53