Packing List - IEI Technology HYPER-AL series User Manual

HYPER-AL SBC

2.3 Packing List

NOTE:
If any of the components listed in the checklist below are missing, do not
proceed with the installation. Contact the IEI reseller or vendor the
HYPER-AL was purchased from or contact an IEI sales representative
directly by sending an email to sales@ieiworld.com.
The HYPER-AL is shipped with the following components:
Quantity Item and Part Number
1 HYPER-AL single board computer
1 COM port cable
1 SATA and power cable
1 Heat spreader
4 Brass male-female spacer
(M3*20mm, thread: 6mm)
Image
Page 11